Fusion 878A

Post here to indicate any hardware you have used and which is known to work with ZoneMinder. Not for questions.
Post Reply
germandms
Posts: 40
Joined: Mon Oct 03, 2005 2:19 pm

Fusion 878A

Post by germandms »

hello
I have a capturadora card with chip "Fusion 878A". the problem is that it does not show single image to me appears a blue picture I have tried with tvtime with xawtv and the result is the same one.
somebody has some experience with this chip

thanks
jameswilson
Posts: 5111
Joined: Wed Jun 08, 2005 8:07 pm
Location: Midlands UK

Post by jameswilson »

if its a 4 input single chip try assing this line to your modprobe.conf
options bttv card=77


James
James Wilson

Disclaimer: The above is pure theory and may work on a good day with the wind behind it. etc etc.
http://www.securitywarehouse.co.uk
posticchio
Posts: 6
Joined: Sun Oct 23, 2005 3:52 pm

Fusion BT878A vs BT878

Post by posticchio »

[English]

hi,
i would like buy the card with Connexant Fusion BT878A , but the chip Fusion Bt878 A is similar a BT878 ? It can work good?

Thank you very much
Andrea
posticchio@yahoo.it


[Italiano]
Ciao,
vorrei acquistare una scheda con il chip Connexant Fusion BT878A, ma vorrei sapere la compatibilita' di questo chip con il "normale" BT878.
Funziona bene lo stesso?

Grazie mille
Andrea
posticchio@yahoo.it
jameswilson
Posts: 5111
Joined: Wed Jun 08, 2005 8:07 pm
Location: Midlands UK

Post by jameswilson »

878 chip is fine but not all boards work. its like a pc the processor isnt the only thing that makes it work. most 878 based boards work they just might need a bit of coaxing
James Wilson

Disclaimer: The above is pure theory and may work on a good day with the wind behind it. etc etc.
http://www.securitywarehouse.co.uk
germandms
Posts: 40
Joined: Mon Oct 03, 2005 2:19 pm

my modprobe.conf

Post by germandms »

It is my /etc/modprobe.conf

Im have suse 10.0

options bttv pll=1 radio=0 card=0
# options tuner type=0
# options msp3400 once=1 simple=1

# install bttv /sbin/modprobe --ignore-install bttv && { /sbin/modprobe -k tuner; /sbin/modprobe -k msp3400; }
#
User avatar
cordel
Posts: 5210
Joined: Fri Mar 05, 2004 4:47 pm
Location: /USA/Washington/Seattle

Post by cordel »

Try,

# options bttv pll=1 radio=0 card=0
options bttv radio=-1 card=77

Regards,
Cordel
Post Reply