Doorbird D101 Door Intercom

Post here to indicate any hardware you have used and which is known to work with ZoneMinder. Not for questions.
Post Reply
Transalpler
Posts: 2
Joined: Tue Nov 01, 2016 5:47 pm

Doorbird D101 Door Intercom

Post by Transalpler » Tue Nov 01, 2016 6:09 pm

I have connected my Doorbird to Zoneminder with following Settings:

General:
Source type:Remote

Source:
remote protocol: HTTP
Remote Method : simple
Remote Host Name : camera IP address
Remote Host Port : 80
Remote Host Port : /bha-api/video.cgi?http-user=USERNAME&http-password=PASSWORD
640 x 480

with these Settings I can't get Live View - but pictures are stored right.

Doorbird ist ONVIF Certified from FW 101 upward -Currently they are rolling out FW 100. When trying to setup the monitor with ONVIF Probe - it will be found - but when clicking on Next I get "Unable to probe Network Camera: 255
I already posted an Issue: https://github.com/ZoneMinder/ZoneMinder/issues/1664

Transalpler
Posts: 2
Joined: Tue Nov 01, 2016 5:47 pm

Re: Doorbird D101 Door Intercom

Post by Transalpler » Tue Nov 01, 2016 6:56 pm

For RTSP Caturing:

General:
Source type:FFmpeg

Source:
source path: rtsp://USER:PASSWORD@IP_OF_CAM:554/mpeg/media.amp
Remote Method : RTP/RTSP
1280 x 720 Pixel

matmay
Posts: 1
Joined: Sat Aug 17, 2019 10:48 am

Re: Doorbird D101 Door Intercom

Post by matmay » Sat Aug 17, 2019 10:53 am

I have read the API of Doorbird and it says, that only one video stream is possible. What happens when somebody rings the door, and I then want to view the stream on the app? Does it really stop the stream to zoneminder?

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests