SONY SNC-CS3P and SNC-RZ30P with ZM V1.23.3 & Gentoo 64

[christophe_y2k]

Hello, just for say

I use with relative succes
Sony SNC-CS3P camera with ZoneMinder V1.23.3 on GENTOO 64
camera firmware V1.08

only image on 320x240
640x480 (auto or field or frame) Not Work
736x544 (auto or field or frame) Not Work

idem with SNC-RZ30P firmware V3.14
and PTZ function via network do not work

when i say do not work it possible i do not configure properly devices or zm

[KeithB]

This could be a shared memory problem; shmmax and shmall need to be configured.

[christophe_y2k]

Thanks for your reply

i modify values with

kernel.shmmax = 536870912
kernel.shmall = 536870912

no success with 640x480

since i reinstall the latest version of zoneminder
and now i can't have any image

i search

[whatboy]

here's how to set up the memory size depending on image size, ring buffer, etc...

http://www.zoneminder.com/wiki/index.ph ... esolutions.

[christophe_y2k]

thank for your reply

i try ZM 1.24 with no success no images

i rebascule on the V1.23 and !!!! no image
with or without tune shm

my new config with your help...

kernel.shmall = 2048000
kernel.shmmax = 4194304000

[whatboy]

What are you using VL1 or VL2???

If VL2 try using BGR24 instead of RGB24...

[christophe_y2k]

thanks for your reply
since i reinstall V.1.23 have an issue with apache on my gentoo 64
i need to rename /var/www/zoneminder to /var/www/localhost

and now that run fine with 9 sony SNC-CS3P and 3 sony ptz SNC-RZ30P (but ptz function do not work via lan)

only in 320x240 ....

i search for upgrade to 640x480
and i search a method for create the file to cotrol sony ptz cam

where do you go for change rgb?

PS this soft is very very good