ZoneMinder Forums

Start, Stop, Restart button not working
using Firefox

Jimmy

Just a suggestion, is it possible to have the zone preset show what preset is used for the camera?
It is difficult to keep notes on each camera zone preset you used last when using many cameras when you are trying to fine tune motion detection.

Jimmy

Pallet to me also means color ?
8 bit grey, 24, 36 bit color
did the camera work with a previous version of ZM

Jimmy

GOT IT!! Camera > Source > Path = "/nphMotionJpeg?Resolution=640x480&Quality=Standard was imputing "nphMotionJpeg?Resolution=640x480&Quality=Standard" I never backed up my monitors table since I only have one camera but I did have an older one that did not have "/" i...

Still trying
Log (attached) seems the same as I posted if I have the correct one

Jimmy

Yes it is an older Panasonic BL-C131A that I use at home just for testing ZM Funny part is it always worked flawlessly and on Mint 19.3 18.04 Bionic on ZM 1.35 before I changed to 20.04 I did wipe 1.35x and installed 1.34x only with the same problem Gut feeling its a problem using 20.04 , possibly s...

Thanks Steve, it was hidden at the top of the wiki page I did not have much luck with that script but I did find this one with some success https://bkjaya.wordpress.com/2020/05/26/how-to-install-zoneminder-master-v-1-35-4-on-ubuntu-20-04-lts-focal-fossa/ This one runs but no monitor to view (Not Gre...

I am on a test machine and for a whim I upgraded Mint 19.4 > 20.04 to see what happens.
Seems ZM is broken however Apache & MSQL are running
I checked the wiki nothing for 20.04 yet , the latest is 19.10
Cannot find any guidance for 20.04 in the forum

Jimmy

FYI 1.35.4~20200513081028-bionic and the one before it
After upgrading error log states to run zmupdate.pl mismatch in db version
After running zmupdate.pl all is fine.

Jimmy

Just got some errors see attached jpg

Jimmy

I am seeing a cyclic replay of a monitor view also event monitor view Ex. An event recorded for 18 seconds only plays 5 seconds, the replays from the beginning. There is no red line on the playback line to show the triggered event. This happens to new and old events. Also if you select a monitor to ...

Wondering if there should be a support topic for Zoneminder 1.35 master ?

Jimmy

Sorry rockedge I just switched to master from storageareas Sunday, and shows no errors now

Jimmy

What general steps do I need to switch StorageAreas to Master, just switching out the PPA ?
I have a general Idea with using the same DB.
Any Ideas

Jimmy

I have been seeing this error the past 4 weeks
1.33.14~20190930144403-bionic was installed 9 weeks ago

Jimmy