ZoneMinder Forums

Just create a new/separate/clone monitor in ZM for the low res record. Keep the original low res at modetect.

In this way you won't have to wade through your constant recordings to see events.

-and- make sure you've upgraded to 1.32.3. Life is good at 1.32.3

If the cameras are onvif capable, I'd put them on your main network "temporarily" to be discovered by ZM's ONVIF discovery. Then just change the ip address when you move them back to your camera network.

Update - Initial Success Upgraded to zoneminder_1.32.2~20181129142911-bionic_amd64.deb (soon to be known as 1.32.3 I think) from the master repo. I am getting audio from my Hikvision cams now w/o any ffmpeg parameters in the source tab or storage tab. I also removed the values from the Max FPS and A...

I used to use it but have converted to utilizing the new Web Site type monitor to access the cameras controls directly. Looks like this. Screenshot at 2018-11-15 11-17-46.png Create a group and use montage view. See this discussion if you have x-frame-option issues https://forums.zoneminder.com/view...

Further Update: Getting closer.... In the Options field on the Source tab, I replaced the allowed_media_types=video with -ar 8000 It started recording audio, HOWEVER, the recorded video was all jacked up and didn't quit seem to be in sync with the video. "Jacked up" means strange compressi...

Status Update: When capturing directly with this ffmpeg -i rtsp://user:password@192.0.0.99:554/Streaming/Channels/101 -c:v copy -c:a aac foo.mp4 title : Media Presentation encoder : Lavf57.83.100 Stream #0:0: Video: h264 (High) (avc1 / 0x31637661), yuv420p(progressive), 1920x1080, q=2-31, 15 fps, 30...

A little extra info would help. OS/stack/zm version/install method But to attempt to answer your questions: But it is recording an event for ~10 minutes... every 10 minutes, in Mocord. I do want to record 24x7 but please tell me this isn't a workaround to do that? I only installed it today and alrea...

okay, is anybody with any camera capturing audio with H264 passthrough?

[Edit] on play back of course... There is no audio on live monitor.

I'll add to this issue. I'm running UB18.04 ZM1.32.2 FreeNAS event storage over NFS. My events are recorded as H264 passthrough triggered (Nodetect) by low res stream on modetect. The actual video files are not in the event directory. The snapshot and thumbnail are though. It doesn't happen all the ...

Not to be dense, but I'll be dense...

Is this the entirety of the /etc/nginix/nginx.conf or is this an include conf in the .../sites-enabled/ ?

@api

Full config (ZM web interface is fully operational with this one, only api throws errors):

Do you mind sharing how you got ZM to work on ngnix?

I've yet to figure this one out.

I've seen it to, but only on h264 recordings.
The old MJPEG work as they did.

Did you try shorter events?

I stick to 10 mins (600) on my continuous record.

30 mins seems like a really big recording to have to manage.

This actually sounds like a buffer issue.
If you're hires stream is running at a higher frame rate (that's the way I run it) you will need to adjust your pre-event buffers accordingly.

5 seconds at 4fps are 12 pre-event frames.
5 seconds at 10fps are 50 pre-event frames.

So Asker kicked in on Slack and got me down the path of a reverse proxy. Note, this reverse proxy method is not working but because of my non-guru status when it comes to Apache, I thought I'd share and see if someone could fill in the blanks or suggest a better way to do it. After a2enmod'ing proxy...