ZoneMinder Forums

maybe u are from UE got mine from UK :

http://cgi.ebay.co.uk/8CH-200FPS-240FPS ... 19b986cd14

cheers

oh ps, i record only in 320x240 i dont like the way its interlaced in 640x480

its not crashing the sistem problem was that sources were going red, i still have that error in logs, but i have it runing for 2 months already without any probles (no more red sources) if u put MAX_RESTART_DELAY = 1 cheers

hmm read here.

http://www.zoneminder.com/forums/viewto ... highlight=

i say its a good buy.

hy, had a similar problem with you. i run my cams at 10fps also. so what i did was put "Pre Event Image Count" at 25 so this way it writes the event with 2seconds before an alarm is detected (25 frames will be with no alarm) and "Post Event Image Count" at 100 so basicaly it reco...

hy, can anyone recomend me an external camera with good zoom and infrared if posible ? ptz aint a need but infrared its almoust a must for nightvision.
i need it to be able to view about 160grades angle at max zoom out.
thanks

search easy cap on google, i had one working but picture its crapy...

how did u managed to install vloopback ? i mean what setings u used in zm for it? i havent had any success with it... was working with motion, but could not make it work with zm also at same time. maybe u can post some how-to. thanks

hy, how can i set up minimum alarm frames? for example not to record an event if aint 5 consecutive alarm frames? i tryed : Alarm Frame Count 5 from Buffers tab, but than i get a "next event in 2 seconds" or something like that when i try to preview the events. can anyone help on doing it ...

Hey, can any one provide a how-to on seting up zones? i mean sensitivity, if i use preset values like "Best, high sensitivity" i find it rather medium sensitivity, if i adjust the values (min/max alarmed area 3/0, min/max filtred area 2/0, min/max blobs area2/0) i get lots of false alarms,...

i'm having a strange problem with zm, afther few tries and recompiles of zm 1.24.2 my apache hangs when i try to vie events. it displays one frame from it and hangs, if i restart works again till i try to view an event. i have no idea how to debug this, since other pages i have hosted on same box wo...

ns1:~# cat /etc/debian_version 5.0.3 ns1:~# uname -r 2.6.30-bpo.2-686-bigmem ns1:~# free total used free shared buffers cached Mem: 2074344 1942320 132024 0 132760 1643648 -/+ buffers/cache: 165912 1908432 Swap: 1967920 6232 1961688

i have exactly same problem as you'rs i have a 8 x saa7130 200fps card, and i get the same problem, my load stays at 0.2 - 0.4 so its not a high load. my card has heat sinks on each chipset, so i dont know if its a temperature problem... well anyway if u crack this let me know plz :) Happy new year!

hy, i have a problem canot get zm runing with the vloopback, i succesfuly added the module, modprobed with pipes=2 and i use video_pipe /dev/video8 and in zm /dev/video9. tryed all the modes in zm, v4l1 and all color modes, but none its working...can u asist somehow? how can i check what video modes...

hmmm i have instaled u'r latest version, runing windows 7 64bit, works ok, but i canot view events... i can view the list but have no idea how i can open to view what it recorded. isnt that feature implemented or ? thanks a lot