Search found 24 matches

by Greg_Talyor
Fri Sep 11, 2020 9:04 am
Forum: ZoneMinder 1.34.x
Topic: Thank you and zone sensitivity
Replies: 10
Views: 1313

Re: Thank you and zone sensitivity

The worst case I've seen was an 1.5 seconds gap between two alarm frames. Even worse. I have a gap of 4 seconds between two consecutive alarm frames. The timestamps, that the camera put on and the one by Zoneminder, differ by 8 seconds. Not good. I wonder where to start to reduce them to more accep...
by Greg_Talyor
Thu Sep 10, 2020 11:48 am
Forum: Non-ZoneMinder Chat
Topic: [SOLVED] Axis M3025-VE - constantly switching between day/night modes
Replies: 3
Views: 442

[SOLVED] Axis M3025-VE - constantly switching between day/night modes

When I have an Axis M3025-VE camera's IR filter on auto, it ticks — switching between day/night modes — like a clock (as in tick-tock, tick-tock) for good several minutes during dusk and dawn. Can't they just have its light sensor less accurate? The problem is more profound when I have WDR switched ...
by Greg_Talyor
Tue Sep 08, 2020 11:17 am
Forum: ZoneMinder 1.34.x
Topic: Thank you and zone sensitivity
Replies: 10
Views: 1313

Re: Thank you and zone sensitivity

Glad you liked the documentation on that. Note that if you are interested in object detection, you should also look at the ES with object detection. It now supports the coral edge TPU ($70) and object detection is made affordable without expensive GPUs I have two 2MP cameras on an Intel i5 box, whi...
by Greg_Talyor
Mon Sep 07, 2020 8:55 pm
Forum: ZoneMinder 1.34.x
Topic: Thank you and zone sensitivity
Replies: 10
Views: 1313

Thank you and zone sensitivity

Just wanna say thank you to the developers and documentation writers. My 1.34.20 on Debian 10.5 Buster works right out of the box. I yet to learn how to tweak this and that, but basically I have a working systems right away. There are three issues that I face initially. None of them is showstopper. ...
by Greg_Talyor
Sat Sep 05, 2020 7:56 pm
Forum: ZoneMinder 1.35.x
Topic: Problem with ONVIF auto discovery on Axis M3025-VE
Replies: 7
Views: 729

Re: Problem with ONVIF auto discovery on Axis M3025-VE

I fail to reproduce the above problem on my Dell laptop. I wipe it clean and install Debian 10.5 Buster via wired ethernet. And then turn off ethernet and switch to Wifi before installing Zoneminder v1.34.20. As before, ONVIF manages to discover both cameras alright. Without changing the sources, th...
by Greg_Talyor
Thu Sep 03, 2020 10:30 am
Forum: ZoneMinder 1.35.x
Topic: Problem with ONVIF auto discovery on Axis M3025-VE
Replies: 7
Views: 729

Re: Problem with ONVIF auto discovery on Axis M3025-VE

169.254.*.* are link-local addresses. That explains why ONVIF auto discovery works fine for Nikvision in either box, 'cos its default IP is 192.168.1.64 (even though DCHP server assigns a different IP to it), which is already a part of the 192.168.1.0/24 network. What I care about are the Axes whic...
by Greg_Talyor
Wed Sep 02, 2020 10:38 pm
Forum: ZoneMinder 1.35.x
Topic: Problem with ONVIF auto discovery on Axis M3025-VE
Replies: 7
Views: 729

Re: Problem with ONVIF auto discovery on Axis M3025-VE

Does the non-working machine have a second network that is actually it's primary? ... zmonvif-probe.pl -v probe Thanks for your swift reply. Ah-ha! "Second network vs primary". On the Dell laptop (which works), its Wifi works out of the box, so its wired ethernet is never used at any time. On the H...
by Greg_Talyor
Tue Sep 01, 2020 11:11 pm
Forum: ZoneMinder 1.35.x
Topic: Problem with ONVIF auto discovery on Axis M3025-VE
Replies: 7
Views: 729

Problem with ONVIF auto discovery on Axis M3025-VE

Hi, there. I have a problem with ONVIF auto discovery with two Axis M3025-VE. ONVIF works just fine from a Dell Latitude E6410 laptop (Intel Core i7-640M CPU @ 2.80GHz, 4GB RAM), but an HP ProDesk 600 G3 Desktop Mini (Intel Core i5-6500T CPU @ 2.50GHz, 8GB RAM) fails to auto discover my Axes. All fo...
by Greg_Talyor
Mon Aug 17, 2020 7:55 pm
Forum: ZoneMinder 1.35.x
Topic: [Solved ]Can't add usb camera to Zoneminder master 1.35.5~20200714143209-focal
Replies: 9
Views: 1483

Re: Can't add usb camera to Zoneminder master 1.35.5~20200714143209-focal

I have the same problem here. I'm quite certain that Device Format = 255 Capture Palette = 0 are for correct for my webcam. When I try to save from Monitor > Source, Zoneminder 1.34.19 complains Palette must be set to a valid value Format must be set to a valid value Same problem when I install afre...