ZoneMinder Forums

Ok I will give it a try later. Thanks.

Running 1.36.24 Altered camera resolution and noticed only zone for that camera no longer was lined up correctly. Tried to edit the zone and when trying to save it reverts back to what was there. Created a new Zone and tried to delete the "corrupt one" to no avail. Getting these in the web...

Thank you. My bad!

Got it. Had to enable zoneminder.conf and enable rewrite engine.

I believe you are correct, however running sudo a2ensite shows only 000-default and default-ssl. Obviously not one for zoneminder. Where or how do I configure zoneminder site?

I thought this was set up automatically??

Nevermind. Got it. Had to enable zoneminder.conf and enable rewrite engine.

Installed Zoneminder on a new system using ppa:iconnor/zoneminder-1.36 All seemed to go well but I am not able to access the web interface. zmdc.log 05/20/2022 06:32:45.905636 zmdc[1027].INF [ZMServer:411] [Server starting at 22/05/20 06:32:45] 05/20/2022 06:32:46.948969 zmdc[1027].INF [ZMServer:411...

Not seeing a way to make a copy of an existing Zone. Is there a way?

Not sure if this helps but I was able to lower the increasing memory of the zmc process by setting the camera from Modect to Monitor then back to Modect. This way I don't have to reboot the system. I can set up a cron job to change the monitor function every couple of days. http://45.47.201.189/ZM_p...

I had a similar problem when using High bandwidth. I set it to medium and was fine.

It looks like you have a problem with the /etc/nginx/sites-enabled/example file.

I have four cameras, three are 5MP and one 6MP set at 1080P. One is 24x7 Modect and the others are only set to Modect when I'm away for the day. Of the four zmc processes running only one is much higher than the other three and slowly growing, in terms of memory usage. http://45.47.201.189/ZM_proces...

How do I go back to 1.36.4. ZM keeps hanging or freezing up. 1.36.4 worked much better, albeit not perfect.

I bought a Reolink camera, had to return it. Just did not work very well on Zoneminder. Video became very distorted when analysing. I am using the GW Security 5077 6077 and 5037 cameras which work very well. I even had a Foscam RC2 that was fine too.

Wrote one using groovy (no curl) as well but want to see about getting it running as a systemd service and eventually see if I can run it directly from the Hubitat hub directly when switching location modes.

Switched over to the Hubitat platform: Not sure if anyone is interested in this but I wrote a PHP CLI script to update certain (inside) monitors to change from [Monitor] to [Modect] and back depending on Hubitat location mode changing between [Home] and [Away]. I run it under a cron job every 5 minu...

Thank you!!