Search found 68 matches

by littlej
Fri Jan 13, 2017 2:42 pm
Forum: Hardware Compatibility List
Topic: COTIER IPc-631/T13
Replies: 7
Views: 7263

Re: COTIER IPc-631/T13

Hi, i cannot access the camera right now, but if i remember correctly you can check on the camera the hardware revision.
by littlej
Mon Nov 28, 2016 7:59 pm
Forum: Hardware Compatibility List
Topic: COTIER IPc-631/T13
Replies: 7
Views: 7263

Re: COTIER IPc-631/T13

well another update :P

it seems that if i set the camera on CBR ( constant bit rate ) and i frame key at 15 frames and running 15 fps no more pink rubbish on the stream.

all looks good so far.
by littlej
Mon Nov 28, 2016 2:22 pm
Forum: ZoneMinder 1.30.x
Topic: pink stream after some time ( SOLVED )
Replies: 0
Views: 550

pink stream after some time ( SOLVED )

Hi, i have some COTIER IPc-631/T13 ip camera all working with zm 1.30.x set like in this topic (https://forums.zoneminder.com/viewtopic.php?f=10&t=22386&p=89691&hilit=littlej#p89691) The problem is after a while the stream gets all pink and wont get back only if i disable the monitor and re-enable i...
by littlej
Mon Nov 28, 2016 2:15 pm
Forum: Hardware Compatibility List
Topic: COTIER IPc-631/T13
Replies: 7
Views: 7263

Re: COTIER IPc-631/T13

update... after some time this is what happens and i have no idea how to solve it for now :(

i am open for suggestions.

thanks
by littlej
Sun Nov 27, 2016 8:43 pm
Forum: Hardware Compatibility List
Topic: COTIER IPc-631/T13
Replies: 7
Views: 7263

Re: COTIER IPc-631/T13

Hi arymar, thanks for the update. I have updated my cotier firmware using latest version from here : http://www.en.tpsee.com/deviceupdate/95-1.html ( TH38C5/R6_ONVIF_P2P_firmware_V2.5.1.12 ) at least this suits my camera. Since update i find the stream more stable and available at main: rtsp://admin...
by littlej
Thu Feb 18, 2016 3:12 pm
Forum: ZoneMinder 1.29.x
Topic: Dlink DCS-5300G not working on ZM v1.29
Replies: 14
Views: 5602

Re: Dlink DCS-5300G not working on ZM v1.29

i had sampe problem when going from 1.28.1 -> 1.28.108

check my post : viewtopic.php?f=32&t=23679&p=90586&hili ... ent#p90586

upgraded to 1.29 hoping this solved the problem but still not working.
by littlej
Wed Nov 18, 2015 7:12 am
Forum: ZoneMinder 1.28.x
Topic: Unable to get response, disconnecting
Replies: 4
Views: 6812

Unable to get response, disconnecting

Hi, i have a Vivotek PZ6122 and it used to work on zoneminder 1.28.01 with the following settings : Source Remote : http / simple host name : user:pass@ip host path : /cgi-bin/video.jpg widh/height 352 / 288 I upgraded to 1.28.108 and it stopped working, now i get the following error message: 2015-1...
by littlej
Mon Nov 09, 2015 7:36 am
Forum: ZoneMinder 1.28.x
Topic: disk percent not working
Replies: 2
Views: 992

Re: disk percent not working

ok, so disk percent works now, it seems it is not working with a symbolic link anymore, i had to edit the path options in zm.
by littlej
Mon Nov 09, 2015 7:22 am
Forum: ZoneMinder 1.28.x
Topic: disk percent not working
Replies: 2
Views: 992

disk percent not working

Hi, i just installed 1.28.108 on ubuntu 14.04 but now i have a problem with disk percent. My cams are recording ok but disk percent does not increase, check the attached (untitled) file and this is my df output : Filesystem Size Used Avail Use% Mounted on /dev/sda2 143G 19G 118G 14% / none 4.0K 0 4....
by littlej
Tue Nov 03, 2015 8:08 am
Forum: ZoneMinder 1.28.x
Topic: Mysql High cpu usage. Any tweaks to fix it?
Replies: 7
Views: 2761

Re: Mysql High cpu usage. Any tweaks to fix it?

i have same problem, but this appeared when i upgraded zm to 1.28.107, my load went from ~1.5 to almost ~3.5 only with a zoneminder upgrade :(
by littlej
Tue Nov 03, 2015 7:49 am
Forum: ZoneMinder 1.28.x
Topic: ZM 1.28.107 problems after upgrade
Replies: 17
Views: 3901

Re: ZM 1.28.107 problems after upgrade

Hi, i upgraded to 1.28.107 and now my mysql is using 100% from one of my cpu : PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1029 mysql 20 0 2401336 180956 4180 S 99.9 4.5 16411:37 mysqld now my load went from ~1.25 to ~3.50, also i have some vivotek pz6122 wich worked well on previous versi...
by littlej
Fri Sep 12, 2014 8:37 am
Forum: ZoneMinder 1.27.x
Topic: Ubuntu 14.04.1 and zm 1.27.1 issues
Replies: 23
Views: 7824

Re: Ubuntu 14.04.1 and zm 1.27.1 issues

Hi, i have installed ubuntu + zoneminder like specified a few posts back under vmware I have a Foscam FI9818W and in vlc i can see the stream at rtsp://user:pass@ip:88/videoMain if i set it up as ffmpeg it works ok at full resolution 1280x720 but i cannot set it as libvlc i get the following warning...
by littlej
Wed Sep 10, 2014 2:09 pm
Forum: ZoneMinder 1.27.x
Topic: help with filters
Replies: 2
Views: 1103

help with filters

Hi, can anyone help me modify the filter purge when full to run only at night time for example only from 00:00 till 05:00? I will give it a try to set it up like this (see attached file) but i would like to know if this will work, is there any wiki documentation about filters? i'm not very familiar ...
by littlej
Wed Sep 10, 2014 12:08 pm
Forum: Hardware Compatibility List
Topic: COTIER IPc-631/T13
Replies: 7
Views: 7263

Re: COTIER IPc-631/T13

Just as an update.

Installed this camera for some time now and it's pretty stable so far but the downside is the night vision, wich is totally useless :) and i mean useless :) I have it running outside at a range of ~15m and you cannot see anything :)